QIACHIP Store
Rate of transmission: maximum 10KB / S
Transmit deviation: +/- 7. 5KHZ / narrow-band emission
Modulation: ASK
Operating Voltage: DC 3V-24V
Customizable special code: MCU type.Optional fixed encoding type: PT2262 / EV1527 / HT6P20B
Key data: A, B, C, D groups of 4 inputs can be combined into 15 groups.Standby current: <3UA
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.
Pairing
QIACHIP 2PCS TX118SA-4 RF Wireless Transmitting Module ( without Pin) | 433Mhz | 1527 Learning Encoding
Regular price
$5.99
Package Includes
2 pcs * Transmitting Module
or
5 pcs * Transmitting Module
This package does not include antenna
Product description
Model: TX118SA-4
Transmitting power: 11dbm
Distance: 20-100M
Emission current: 10MA
Standby current: less than 3UA Distance: 20-100M
Emission current: 10MA
Rate of transmission: maximum 10KB / S
Transmit deviation: +/- 7. 5KHZ / narrow-band emission
Modulation: ASK
Operating Voltage: DC 3V-24V
Customizable special code: MCU type.Optional fixed encoding type: PT2262 / EV1527 / HT6P20B
Key data: A, B, C, D groups of 4 inputs can be combined into 15 groups.Standby current: <3UA
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.
Pairing
- Delete existing data: Press learning button 8 times. Response: LED flashes 7 times.
- Learning remote code: press learning key once, twice or three times (see below). LED turns on:learning mode is active. Press any button of the remote control.
- LED indicator flashes three times:learning successfully completed.
- Test: after the above operation , the receiver board can be controlled by the remote control.
More transmitters with different IDs can be learned and stored additionally, starting with step 2.
A mixture of different modes is possible.
Button usage (sets mode and starts pairing process):
Press once: Inching mode (Momentary Mode)
Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)