Cart 0

QIACHIP

Universal 433Mhz Remote Control Wireless Switch DC 12V 24V 72V 30A remote relay on off use for Smart home appliances Light KR7001

$4.99

Quantity

Features:

1:Powerful components(DC voltage:12V to 72V; Maximum current:30A): Remote control water heater \ Remote control LED \ Remote control Lamp \ Remote control water pump and another remote control device;
2:Control distance: up to 50m (theoretical distance)
3:Simple wiring: only input(V+/V-) and output (V+/V-)
4:Multiple matching methods: many remotes can control the same receiver at the same time(at most 20pcs remotes)
5:The remote control is equipped with a hanging buckle, which can be hung on an object at will.

Technical Data

Model Number: KR7001.

Working Voltage: DC 12V - 72V.

Working Frequency: 433Mhz.

Modulation Mode: ASK.

Receiving Sensitivity: -107dBm.

Working Temperature: -30~+70.

Max Load: 30A Relay, Resistive load≤25A, Inductive load≤20A.

Transmitting Distance: 20 -50 Meters Indoor, 50-100 Meters In Open Space.

Function Option: Momentary / Toggle / Latched.

Matching Mode: Intelligent Learning Code.

Output Mode: Dry Contact /Voltage Output.

Learnable Transmitters: 1-25 transmitters.

Dimension: 85.3*43.6*30.2 (mm).

Remote Control Parameters:

RF frequency: 433MHz
Support encoding: 1527 Leaning code
Transmitting range: up to 50m (theoretical distance)
Battery : 2 pcs CR2016 ( include ) or 1 pcs CR2032

Operating Mode

Setting mode 1 Momentary mode :
Press the learn button once time,
Performance :
Press and hold on one button -> the Electrical Equipment will turn ON;
Release the button -> the Electrical Equipment will turn OFF;

Setting mode 2 Toggle mode :
Press the learn button Twice the time,
Performance :
Press one button -> the Electrical Equipment will turn ON;
Press the button again-> the Electrical Equipment will turn OFF;

Setting mode 3 Latched mode :
Press the learn button Three times,
Performance :
Press A button -> the Electrical Equipment will turn ON;
Press B button -> the Electrical Equipment will turn OFF;

Set-Up
Note: Before configuring the signal, press the learning button 8 times, to reset the receiver.

Setting mode 1 Momentary mode:
STEP 1
Press the learning button on the Receiver Once.
Wait for a moment, the LED will turn on, indicating you entered the learning state.
STEP 2
Press one button on the Remote Control, the LED on the receiver board will flash on;

Setting mode 2 Toggle mode:
STEP 1
Press the learning button on the Receiver Twice.
Wait for a moment, the LED will turn on, indicating you entered the learning state.
STEP 2
Press one button on the Remote Control, the LED on the receiver board will flash on;

Setting mode 3 Latched mode:
STEP 1
Press the learning button on the Receiver Three times.
Wait for a moment, the LED will turn on, indicating you entered the learning state.
STEP 2
Press A button on the Remote Control, the LED on the receiver board will flash on;
STEP 3
Press B button on the Remote Control, the LED on the receiver board will flash on;

Share this Product