Technical Data:

Input Power:AC 85V-250V

Standby Current:<8.5MA

RF Frequency: 433M

RF working mode: superheterodyne

Receive sensitivity: > 97 dbm

Transmitting distance:> 100 m ( open space)

Decoding mode: MCU software decoding

Remote storage: 16 pcs

Support remote type: Learning code, Fixed code

Working mode: Momentary, Toggle, Latching

Wiring type:fixed terminal

Output Terminal :NO , NC , COM

Dimension of PCB:35*30*18mm  (L,W,H)

Wire port :          

NO:     normal open

COM:  common

NC:     normal close

About Working mode:

Momentary: Push the remote button , the relay connects, release the button, the relay disconnects.

Toggle: Push the remote button , the relay connects , push the remote button again, the relay disconnects .

Latching: Push the first remote button, the relay connects, push the second remote button, the relay disconnects.

Clearing the code:

Push the learning button on the receivers for 8 times , the codes will be wiped.

After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.

Learning the code: (momentary)

Push the learning key on the receiver once, initiate momentary setting mode.

Wait for a moment, the LED switches off.

Push the remote button, LED indicator on the receiver board will flash briefly and switches off.

After 3 seconds, the LED indicator will switch on again, indicates remote and receiver are successfully paired.

Learning the code: (Toggle)

Push the learning key on the receiver twice, initiates toggle setting mode

After few seconds, the LED switches off.

Push the remote button, LED indicator on the receiver board will flash briefly and switches off.

After 3 seconds, the LED indicator will be on again, indicates remote and receiver are successfully paired.

Learning the code: (Latching)

Note:For latching mode, you need to learn with two different buttons, the first one for "ON", second one for "OFF".

For example: button A = ON , button B = OFF

Push the learning key on the receiver 3 times, initiate latching mode setting.

Wait for a moment , the LED indicator on the receiver will flash briefly and switches off.

Push the remote button A.

LED flashes 5 times.

Push the remote button B.

Led flashes 5 times .

3 seconds later, the LED indicator will switch on again , indicates remote and receiver are successfully paired.

A = ON , B = OFF.