QIACHIP Store

QIACHIP KR2201B｜75V-250V 30A relay 1CH wireless remote control switches｜433M receiver for lights motor or water pump controller

$8.00

Specifications:

Technical Data Of Receiver(Controller):

Model Number: KR2201B.

Working Voltage: Wide voltage input range AC 75V 110V 115V 120V 220V 250V

Working Frequency: 433Mhz.

Modulation Mode: ASK.

Receiving Sensitivity: -104dBm.

Working Temperature: -30~+70.

Max Load: 30A Relay, Resistive load≤25A, Inductive load≤20A.

Transmitting Distance: 20 -50 Meters Indoor, 50-100 Meters In Open Space.

Function Option: Momentary / Toggle / Latched.

Matching Mode: Intelligent Learning Code.

Output Mode: Dry Contact /Voltage Output.

Learnable Transmitters: 20 transmitters .

Dimension: 64x42x29 (mm).

Support Remote control type: EV1527,2262.

About Working Mode:

Momentary:

Push the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle:

Push once the remote button , the relay connects , push twice the remote button , therelay dis-connects .

Latched:

Push the remote button A, the relay connects, push the remote button B, the relay disconnect.

How to set？

Setting method

Clearing the code:

Push the learning button on the receivers for 8 times , the codes will be cleaned .

After clearning the code, all the remote control cannot work any more.

Learning the code: (momentary)

Press the learning key(on the Receiver)Once time, the LED (on the Receiver)will blink one time. When the LED is on, press the button of the remote control(You want to let it learn), the LED (on the Receiver)will blink for 3 times and then turn off, Learning to succeed.

Learning the code: ( Toggle )

Press the learning key(on the Receiver)Twicetimes, the LED (on the Receiver)will blink 2 times. When the LED is on, press the button of the remote control(You want to let it learn), the LED (on the Receiver)will blink for 3 times and then turn off, Learning to succeed.

Learning the code: ( Latched )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".

For example : button A = ON , button B = OFF

Press the learning key(on the Receiver)Threetimes, the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.

A = ON , B = OFF .