[Battery Not Included]
This Wall Panel Remote Control Switch (remote control) only support the receiver with learning code (1527) :
Compatible with remote control using the following chips:
PT1527,EV1527, SCT527, HS1527, SCL1527, FP1527,EV1527
It is STRONGLY recommended to purchase our receiver with out transmitter Receivers sold in other stores may not be compatible with this transmitter.
Wall Panel Remote Transmitter 1/2/3 Buttons are Optional.
- A wall panel switch wireless transmitter which can replace your conventional switches.
- A learning code transmitter with EV1527 Chip.
- Can pair with most of the learning code receivers,
- Can work with any learning code receivers in our store.
Battery model: CR2032 Alkaline Battery (The battery is not included in the package)
Working Frequency: 433.92 Mhz
Range of operation: 80m (in open area) 20m (indoor)
Material: HDPE Plastic
Material: HDPE Plastic
So only professionals are recommended to purchase our transmitter alone. Vice versa, purchasing our receiver alone is not recommended.
Our dear customers. If there are any questions, please do not hesitate to contact us.
For the receiver and transmitter to be compatible, their frequency, chip and shock-resistance must be taken in to consideration.If you insist on using your own receiver or transmitter, they must be 433mhz Frequency with a learning button and compatible with 1527 chip.
Setting momentary Mode:Press the receiver's Learning button 1 time, the receiver's red LED will be switched on, pairing status (initiated); Press the remote's button, the receiver's red LED will flash then switch off, Pairing success.
Setting Toggle Mode:Press the receiver's Learning button 2 time, the receiver's red LED will be switched on, pairing status (initiated); Press the remote's button, the receiver's red LED will flash then switch off, Pairing success.
Setting Latched Mode:(Note: When you choose "Latched Mode", you need to setting two different buttons on the Remote control, the first time learn is for “ON”, the second time learn for “OFF”.For example: button A = ON, button B = OFF)Press the receiver's Learning button 3 time, the receiver's red LED will be switched on, pairing status (initiated); Press the remote's A button, the receiver's red LED will flash and then remains lit; Then press the remote's B button, the receiver's red LED will flash then switch off, pairing success.Note: A Smart Switch can only store 12 buttons (on the remote). Saved button number of more than 12, the remote control might malfunction (unable to control). You need reboot the receiver and reset the RF remote control settings (press the Smart Switch's matching button 8 times)
The input voltage: AC85V - AC220V
RF working frequency: 433.92MHz
RF work modes: Superheterodyne receiver
Receiving sensitivity: - 107DBM
Max range: >20m
Max storage: 12 buttons
Work modes: momentary, toggle, latched