Qiachip TX118SA-4+RX480E-4A | Wireless wide voltage coding Transmitter and decoding Receiver kit
This Order Contains 1 Sets
1 pcs * Receiving Module
1 pcs * Transmitting Module
This package does not include antenna
Working voltage: DC2.5V-5V
Working current: 3MA
Rate: MAX 10KB/S
Working mode:Point move, self-locking, interlocking
Output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons.
Emission current: 10MA
Rate of transmission: maximum 10KB / S
Transmit deviation: +/- 7. 5KHZ / narrow-band emission
Operating Voltage: DC 3V-24V
Customizable special code: MCU type.Optional fixed encoding type: PT2262 / EV1527 / HT6P20B
Key data: A, B, C, D groups of 4 inputs can be combined into 15 groups.Standby current: <3UA
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.
- Delete existing data: Press learning button 8 times. Response: LED flashes 7 times.
- Learning remote code: press learning key once, twice or three times (see below). LED turns on:learning mode is active. Press any button of the remote control.
- LED indicator flashes three times:learning successfully completed.
- Test: after the above operation , the receiver board can be controlled by the remote control.