This cloning remote are capable of cloning all 433.92mhz fixed code key fobs. Some remotes using this frequency are listed below. This is not a complete list! If your remote uses the 433.92mhz frequency it might work with the remote duplicator (note: Some rolling code remotes will not work)
The Cloning Remote can clone commercial PT2262 PT2264 PT2260, PT2240, PT1527, SC2262, SC2260, EV1527, SCT527, HS1527, HS2240, SCL1527, FP1527, HS2262, HS2260, LX2262, LX2260, EV1527 all HCS101 part HCS200 HCS301 encoding chip. Such as the sound table frequency stabilization, can copy the commonly used electric door, gate, fixed code, learning code, such as rolling code wireless remote control, the operation is simple, practical and convenient.
If you fail to copying with proper operation, the chip your remote control are using might not be compatible with our remote duplicator.
1.Clear the existing code in remote duplicator: Long press the A & B key at the same time and release your hand when the light flashes rapidly.
2.Copy: Press the A button of the remote duplicator, and press the button of the remote control you wish to copy, hold it for a few seconds. Until the light on the remote duplicator flashes for 3 times.
3.Use: If all the above operation succeed, the remote control can be used directly. If it can not work, please operate again from Clearing.
4.Recover: If you mistakenly deleted the codes. You can press the two keys at the the bottom (C&D) same time for 2 seconds and release when the lights flashes quickly, then the codes will be restored.
Operating frequency: 433.92MHz
Power by 27A 12V battery (Not included)
Size: 55mm x 28mm x 14mm
Distance: Up to 100 meters
We are able to offer our clients a wide range of products in radio control industry and intelligent controller boards;
We are a company which aims to offer good quality products & 100% services;
We are with 10 years experiences for RF solutions and professionally & specially in doing this industry;
We would like to develop new products which meets customers requirements;
We offer 1 year guarantee period for all of our products;
We do also accept both ODM & OEM order;
To make our services 100% satisfied you is our goals !
What are your payment terms ?
For trial order, we need 100% prepayment;
For bulk order , we could receive 30% prepayment, before shipment get the balance payment ;
For OEM order , we need prepayment for deposit, after the samples are confirmed, we will ship out the order order as above.
What's you delivery time ?
For current samples , we will make shipment in 7 days;
For bulk order , we will make shipment in 7-15 days;
For OEM order , we will offer samples in 15-20 days (if no mould required);
For OEM order , we will make shipment in 7-20 days after samples confirmed.
choosing a selection results in a full page refresh