User Menus
How to use QIACHIP receiver module RX480E ? How to set the working mode of RX480E
Latched Latching Momentary Receiver Module RF RX480E Toggle User manual
About working mode:Momentary (Inching Mode): Push the remote button, the relay connects, release the remote button, the relay dis-connects.Toggle (Self-Lock Mode): Push once the remote button, the relay connects, push twice the remote button, the relay dis-connects.Latching (Interlocked Mode): Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. How to use: Reset method: Push the learning button on the receivers for 8 times, the codes will be cleaned.After clearing the code, all the remote control cannot work anymore.The setting of working mode： 1. Momentary Mode: pressing one time the learning key button on the...
Qiachip How to use KR2201G ? A smaller AC Remote control switch !
Qiachip How to use KR2201G ? A smaller AC Remote control switch !
New products are coming online soon ！！KR2201G a Small receiver !
Qiachip Small receiver KR2201G Will be updated in the near future, please pay attention！
QIACHIP TX118SA transmitter module Instructions manual | wireless 433.92mhz rf module | 1527 learning code | superheterodyne receiver wireless decoding
Instructions Latched Latching Momentary RF Toggle User manual
[Transmitter module] Product Model: TX118SA-4 Transmitting power: 11dbm Distance: 25 meters above Emission current: 10MA Rate of fire: maximum 10KB / S Transmit deviation: +/- 7. 5KHZ / narrow-band emission Modulation: ASK Operating Voltage: DC 3V-24V Encoding: Learning code EV1527 Each module has a unique ID address code. All modules K1-K4 four key code is the same. Pin Description: - : Negative power supply +: Positive power supply, DC 3-24V K1: 1 short to Negative start transmitting data, Similar the A button on the remote control. K2: 2 short to Negative start transmitting data, Similar the B button on the remote control. K3: 3 short to Negative start transmitting data, Similar...
Qiachip KT02-117S-4 1527 Learning code remote control instruction manual
Model: KT02-117S-4 Product Type: KT02-117S-4Product Type:Learning Code (1527) Remote Control Key FobRF Frequency: 433 MHzChannel Supported: Four ChannelButtons: Four ButtonsModulation System: ASKBattery: CR2032 Operating Current:12mATransmitting Power: 10mWTransmission Distance: 50m(Please notice that the 100m distance is the ideal distance without any block and signal interfere. It would rise and fall about 10%-50% with the block and signal interference).Color: BrownMain Item Size: 6.5 * 3.2 * 1.2cm / 2.55 * 1.25 * 0.47inMain Item Weight: 28g/o.9oz Each remote controller has an independent address code, so the remote controllers are separate individuals and do not cause mutual interference. Applications Anti-theft alarm system for...