Product parameters

Operating Voltage: DC 3.6V~24V

Maximum load: 2A

Quiescent Current: 3.6mA ~ 5.5mA

Frequency: 433MHz（315MHz Can be customized in batches）

Receiving sensitivity：≥-107dBm

Output Voltage:

input DC3.6V~DC24V

output DC3.6V~DC24V

Modulation mode: ASK(superheterodyne)

Size: 25.5mm x 13mm x 5mm(Length x width x height)

Support encoding format: 1527 Learning code

Number of storage remotes: ≤10 pcs

Working mode: Momentary, Toggle, Latching

Working temperature: -20~80 degrees Celsius

Application range

LED Light, LED Light string, Christmas tree lights string, Light control switch

Product wiring diagram

Instructions

Reset: Continuously press the learning button on the module for 8 times without interruption, the indicator will flash rapidly seven times and then go out.

Momentray: Press the learning button once, the indicator light is always on; then press the remote control button, the indicator flashes three times and then goes out, the learning is successful; if the code has not been successful, the indicator will go out after 15 seconds to exit the learning state.

Toggle: Press the 2 learning button, the indicator light is always on; then press the remote control button, the indicator flashes three times and then goes off, the learning is successful; if the code has not been successful, the indicator will go out and exit the learning state after 15 seconds.

Latching: Press the 3 learning button, the indicator light is always on; then press the remote control button that needs to control ON, the indicator light flashes three times and then lights up; then press the remote control button that needs to control OFF, the indicator light flashes three times and then goes out, learning is successful If the code has not been successfully successful, the indicator will go out and exit the learning state after 15 seconds.

Precautions

1. When the remote controller voltage is insufficient, please change the battery in time (the remote control distance becomes closer when the remote controller battery voltage is insufficient).
2. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, to avoid remote control and short receiving distance or to work properly. 3. Do not use this electronic product abnormally. Abnormal use will reduce the performance and longevity of the product. In severe cases, damage to the product will also bring hidden dangers to your safety.

BUY NOW