QIACHIP WP8601&KR2201D | wirless wall panel light switch set |433 Mhz Wireless RF Wall Panel Transmitter/Reciver remote control Switches 110V 220V Home Automation WP8601&KR2201D
[Battery Not Included]
Operating Frequency: 433MHz
Model Number: KR2201D-4.
RF Frequency: 433MHz.
Input Voltage: AC 90V~250V.
Modulation Mode: ASK.
Remote Storage: 25pcs.
Wiring Type: Fixed Terminal.
Encoding Type: Intelligent Learning Code.
RF Working Mode: Superheterodyne Reception.
Working Mode: Momentary, Toggle and Latching.
Remote Control Range: >50m (Free Space).
Color: Green(PCB Board), White (Outside Shell).
Package Size: 8.2 * 4.2 * 2.5cm/3.22 * 1.65 * 0.98in.
Package Weight: 55g/1.94oz.
Note : This Product NO WIFI Function. Only RF 433Mhz Function.
*Support Multiple Working Mode: Momentary, Toggle and Latching Mode. *Support the type of remote control(Support Code): Learning Code(1527), Fixed Code(2262). *Support storing the quantity of remote control: 25 Pcs(NOTE: The system can store for 20 pcs of remotes, if the remote get more than 20 pcs, the initial remote control will be lost). *RF Working Mode: Superheterodyne Reception (Modulation Mode:ASK). *Perfect suitable for remote control of electric lamp, electrically operated gate, electrically operated window, roller shutter door, garage door and other telecommand equipments.
How to install this smart switch:
You don't need to open the outer casing of this smart switch. You can wire directly to the terminal block. Please note: Please turn off the power before wiring. Please connect the wires according to the following diagram.
About Working Mode:
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects. Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Receiver Code Resetting/Clearing:
Push the learning button on the receivers 8 times, the codes will be cleared. After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.
Learning The Code (Momentary):
Press the learning key once, the LED on the Receiver will flash once. When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.
Learning The Code (Toggle):
Press the learning key twice, the LED on the receiver will flash twice. When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.
Learning The Code (Latching):
Notes: Latching mode require 2 different buttons, the first one for "ON", the second one for "OFF". For example: button A = ON, button B = OFF. Push the learning key on the receiver 3 times, initiate latching mode setting. Wait for a moment, the LED indicator on the receiver will flash briefly and switches off. Push the remote button A, LED flashes 5 times. Push the remote button B. LED flashes 5 times. 3 seconds later, the LED indicator will switch on again, indicates that the remote control and the receiver are successfully paired. A = ON, B = OFF.
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity. 2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting). 3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board. 4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.
Any more remote control （Transmitter）？