QIACHIP FLC-110V FLC-220V RF433 AC 110V 220V Universal RF Ceiling Fan and Lamp Lights Wireless Remote Control Kit 3 level speed High Med Low RF433 REMOTE CONTROL SWITCHS Non WiFi
[ Update Version ] - Higher Quality, More Stable, Green ABS Environmental ProtectionFit Most Ceiling Fan Lamp.
[ Easy and Fast ] - Installation is very easy and fast, It is a nice looking remote and with rubber textured buttons that are easy to press and it comes with a holster you can mount to the wall.Wireless remote controller kit for ceiling fan lamp .
[ Multi-Functions ] - Includes separate buttons for 3 fan speeds,designed to separately control your ceiling fan speed and light ; Includes wall cradle for handheld remote control,This kit converts regular ceiling fan into a remote controllable one.
[Material] - The transmitter is made of environmental friendly ABS material, larger button is much easier to press. Coming with remote control stand, convenient to put it on table or mount it to wall.
Package list:
remote control * 1 ( battery not include )
remote wall mount * 1
receiver * 1
Quick wiring cap * 5
Specifications:
Applications Light/Fan lamp
Model：FLC-220V/FLC-110V
Voltage: AC 110 V-220 V(Depending on model)
Max Load Power <300W / 10A
Standby Power consumption <0.5 W
Working temperature -20℃~80℃
Control Method RF 433Mhz Remote & Mobile App Control
Wiring Method Load & Neutral Wire
Specifications：
Working Frequency: 50-60Hz
Remote Control Distance: More than 20 meters
Support encoding :1527 learning code
Operating mode :1527 remote control
Loading power:
Ceiling Fan: Max 300 W
Incandescent: Max 1000 W
LED light / energy saving lamp: Max 200 W
Please don’t over loading!
Remote control Specification :
Battery : AAA 1.5 V battery X 2 (package not include)
Size:
Remote control: 5.2 x 1.97 x 0.7 inch (133 mm x 50 mm x 18 mm)
Receiver: 4.5 x 2 x 1 inch (115 mm x 52 mm x 25 mm)
Note：Make sure that there is enough space at the top of the fan to install the receiver！
RF Remote Control Pairing Instructions:
(1) Press Light & HI button together within 15 seconds after the receiver has been connected with power (the LED located at the button of the remote control flashes simultaneously) until you hear 3 beep sound from the receiver.
(2) pairing process is completed.
RF Remote Control Clearing/Reset Instructions:
(1) Pick the remote control you wish to reset.
(2) Press the light button 5 times within 15 seconds after the receiver has been connected with power until you hear a long beep
(3) Remote Control resets and are no longer paired with the receiver.
Turn Your Light NO/OFF with Schedule Timers DIY!