QIACHIP Store
Wall Panel Transmitter
Operating Frequency: 433MHz
Pairing Instructions
Code Clearing:
Receiver Specifications
The input voltage: AC85V - AC220V
RF working frequency: 433.92MHz
RF work modes: Superheterodyne receiver
Receiving sensitivity: - 107DBM
Max range: >20m
Max storage: 12 buttons
Work modes: momentary, toggle, latched
QIACHIP Wireless 433 MHz Remote Control Switch AC 220V 2 CH Wall Transmitter Remote Control Switch RF Relay Receiver Light Switch WP8601&KR2202
Regular price
$5.99
Video Demo:
[Battery Not Included]
Product Description
Wall Panel Transmitter
Operating Frequency: 433MHz
Battery Model: CR2032 (Package Not included battery)
Dimensions: 86mm x 86mm x 13mm
Distance: indoor (20 meters) outdoor (80 meters)
Receiver Module
Model: KR2202-4
Working Mode: Momentary, Toggle and Latching Mode.
RF Frequency: 433MHz
Input Voltage: AC 85V~250V
Standby Current:<8.5mA
Receiving Sensitivity: >97dbm
Remote Control Range: 20-50m (Free Space)
Wired Connection Way: Fixed Wiring Pillar
Output Terminal: NO, COM, NC
On-off Output (Wire Port): NO(Normal Open), COM(Commonality End), NC(Normally Closed End).
Color: Green (PCB Board), White (Outside Shell)
Circuit Board Size: 7.3 * 5.2 * 2.5cm
Notice:
The package Included different products because you choose a Different options.
Modes:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Pairing Instructions
Code Clearing:
Press the Learning Button on the receivers for 8 times. The LED light will flash. Code cleared, receiver reset.
Note that resetting means all your paired remote controls will need to be re-paired in order to control the receiver again.
Note that resetting means all your paired remote controls will need to be re-paired in order to control the receiver again.
Learning the Code: (Momentary)
Press the learning key on the receiver once, getting into "momentary" learning.
Wait for a moment, the LED will be off.
Then push the remote button, LED indicator on the receiver will flash then switch off.
After 3 seconds, the LED indicator will switch on again, which indicates learning successfully.
Learning the Code: (Toggle)
Press the learning key on the receiver twice, getting into "toggle" learning.
Wait for a moment, the LED will be off.
Press the remote button, LED indicator on the receiver will flash then switch off.
After 3 seconds, the LED indicator will switch on again, which indicates learning successfully.
Learning the Code: (Latching)
Note: For latching mode, in order to pair with more remote controls, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver 3 times, getting into "latching" learning.
Wait for a moment, the LED indicator on the receiver board will flash then switch off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will switch on again, which indicates learning successfully.
A = ON, B = OFF.
Receiver Specifications
The input voltage: AC85V - AC220V
RF working frequency: 433.92MHz
RF work modes: Superheterodyne receiver
Receiving sensitivity: - 107DBM
Max range: >20m
Max storage: 12 buttons
Work modes: momentary, toggle, latched
Frequency: 433mhz
Coding: EV1527
Battery model: CR2032 Alkaline Battery (The battery is not included in the package)
Working Frequency: 433.92 Mhz
Chip: QIACHIP1527
Range of operation: 80m (in open area) 20m (indoor)
Color: Milky White
Material: HDPE Plastic
Color: Milky White
Material: HDPE Plastic