12V 2CHANNEL RECEIVER INSTRUCTION KR1202

FUNCTION                                       

Description

* Note This module requires pairing of each key separately

Function1: Press the remote control, the switch works, release the remote control, the switch stops working.(Momentary Mode)

Function 2: Press the remote control, the switch works, press the remote control again, the switch stops working.(Toggle Mode)

Function 3: Press the A button on the remote control, the A relay works, and press the B button on the remote control, the A relay stops working, and the B relay works. Only one relay can work in this function. Press and hold the AB button at the same time, all relays stop working.(Latched Mode)

 

Setting Function and Code clearing

After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.

Clearing operation: Press the learning button 8 times, and the codes will be cleared.

* Note This module requires pairing of each key separately

Setting Function 1 or 2 or 3 ( Momentary Mode /Toggle Mode/ Latched Mode)

Press the learning button 1 or 2 or 3 time, after the indicator light flashes, press the remote control to enter pairing Function 1or 2 or 3 (Only one relay works in Function 3)

 


Older Post Newer Post


Leave a comment

Please note, comments must be approved before they are published