Qiachip KR2201W 220V Smart Switch User Manual How to use Tuya App and RF Dual control?

Welcome to our online user menu, we will guide you step by step on our product functions. There are multiple functions available on our products including pairing with Amazon Alexa in order to control the switch with voice instructions.

Wiring Instructions

Input N: input neutral wire

Input L:  input live wire

Output N: output neutral wire

Output L: output live wire

Warning

High Voltage, please take necessary precautions in order to avoid electrical shock.

Connect the output N wire and L wire to the device you wish to control. Then, connect the input N wire and L wire to the power source.

RF Pairing/ Programming Instructions

The following pairing/ programming instructions depends on which variation of remote control or wall switch you've purchased with our receiver device.

Control the device with 1 remote button

Press the Learning button on the receiver device once.

Make sure the led light located on the receiver device is flashing.

Press the any key on the remote control for once.

You will be using the key to control both on & off of the device.

Control the device with 2 remote button

Press 2 times the button on the receiver.

Make sure the led light located on the receiver device is flashing.

Press any key on the remote control (For on), after the led light on the receiver device flashes again. Press another key on the remote control (For off).

You will be using the first key selected to switch on & the second key selected to switch off the device.

 App sync instructions

Scan the QR code above or search app name "smart life" from app store or google shopping. We're now going to guide you step by step on how to pair the device with your smart phone.

Open the Smart Life app click the "+" on the top right corner.

Click "Switch"

Click "Confirm indicator rapidly blink.

Type in the WiFi username and Passwords, then proceed to click "OK".

 

Wait until the loading screen finish up. This usually takes less than a minute.

 

Change the name on the pencil icon (you will need them later), then click completed.

Amazon Pairing Instructions

Open the right tab on your "Amazon Alexa" app, then pick "Skills & Games".

 

Search "smart life" & pick the app on the picture above.

 

Once they are linked you can now use "Hey Alexa, switch on (switch name)". To Control your device.

 

BUY NOW


Newer Post


  • peter lee on

    30 schedule limit for the schedule timer, any way to increase it?

  • Gaia on

    Hi Gibson,
    Maybe you should check setting with your APP first.

  • William Gibson on

    I recently installed a QIACHIP Ceiling Fan WiFi remote control kit. The two parts connected OK and the controls work to switch the light on and off and each of the fan speeds on and off. My problem is the fan and light randomly switch themselves on in the middle of the night. How do I fix this?


Leave a comment

Please note, comments must be approved before they are published