User Menus — RX480E
How to use QIACHIP receiver module RX480E ? How to set the working mode of RX480E
Latched Latching Momentary Receiver Module RF RX480E Toggle User manual
About working mode:Momentary (Inching Mode): Push the remote button, the relay connects, release the remote button, the relay dis-connects.Toggle (Self-Lock Mode): Push once the remote button, the relay connects, push twice the remote button, the relay dis-connects.Latching (Interlocked Mode): Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. How to use: Reset method: Push the learning button on the receivers for 8 times, the codes will be cleaned.After clearing the code, all the remote control cannot work anymore.The setting of working mode： 1. Momentary Mode: pressing one time the learning key button on the...
QIACHIP RX480E-4 receiver module Instructions manual | 433.92MHz | 1527 learning code | superheterodyne receiver wireless decoding
Latched Latching Momentary RF RX480E Toggle User manual
Operating Introduction Clearing the code :Push the learning button on the receivers for 8 times , the codes will be cleaned .After clearning the code, all the remote control cannot work any more.Learning the code :(momentary)Push the learning key on the receiver once time , it comes into momentary setting mode .Wait for a moment , the LED will be off , it comes into learning state .Push the remote button , LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again , learning successfully .Learning the code :...