User Menus — Toggle

About working mode:Momentary (Inching Mode): Push the remote button, the relay connects, release the remote button, the relay dis-connects.Toggle (Self-Lock Mode): Push once the remote button, the relay connects, push twice the remote button, the relay dis-connects.Latching (Interlocked Mode): Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. How to use: Reset method: Push the learning button on the receivers for 8 times, the codes will be cleaned.After clearing the code, all the remote control cannot work anymore.The setting of working mode： 1. Momentary Mode: pressing one time the learning key button on the...

  [Transmitter module]  Product Model:  TX118SA-4 Transmitting power: 11dbm Distance: 25 meters above Emission current: 10MA Rate of fire: maximum 10KB / S Transmit deviation: +/- 7. 5KHZ / narrow-band emission Modulation: ASK Operating Voltage: DC 3V-24V Encoding:  Learning code EV1527  Each module has a unique ID address code. All modules K1-K4 four key code is the same.     Pin Description: - : Negative power supply +: Positive power supply, DC 3-24V   K1: 1 short to Negative start transmitting data, Similar the A button on the remote control. K2: 2 short to Negative start transmitting data, Similar the B button on the remote control. K3: 3 short to Negative start transmitting data, Similar...

New product preview！ New products are coming online soon ！！KR2201G a Small receiver ! Remote Control Switch User Manual 220V Remote Control Switch (Receiver) Qiachip KR2201-4 Wireless Remote Switch user manual Qiachip KR2201D Wireless Remote Switch user manual Qiachip KR2201G Wireless Remote Switch user manual Qiachip KR2201W Wireless Remote Switch user manual Qiachip KR2201WB Smart WIFI Remote Control user manual   Qiachip KR2202 Wireless Remote Switch user manual   12V Remote Control Switch (Receiver) Qiachip KR1201A 12V 1CH Wireless Remote Switch user manual Qiachip KR1202 12V 2CH Wireless Remote Switch user manual Qiachip KR1204 12V 4CH Wireless Remote Switch user manual   24V Remote Control Switch (Receiver)...

Operating Introduction Clearing the code :Push the learning button on the receivers for 8 times , the codes will be cleaned .After clearning the code, all the remote control cannot work any more.Learning the code :(momentary)Push the learning key on the receiver once time , it comes into momentary setting mode .Wait for a moment , the LED will be off , it comes into learning state .Push the remote button , LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again , learning successfully .Learning the code :...

Function description and setting method of KR2202 (remote switch controller/receiver):

A) Reset function:
After pressing the learning button of the KR2202 8 times, the KR2202 clears all remote control data in its memory.
When the LED of the KR2202 flashes several times, the clear function is complete.
(When the data in KR2202 is cleared, all remote controllers (transmitters) cannot make KR2202 work)