User Menus

  [Transmitter module]  Product Model:  TX118SA-4 Transmitting power: 11dbm Distance: 25 meters above Emission current: 10MA Rate of fire: maximum 10KB / S Transmit deviation: +/- 7. 5KHZ / narrow-band emission Modulation: ASK Operating Voltage: DC 3V-24V Encoding:  Learning code EV1527  Each module has a unique ID address code. All modules K1-K4 four key code is the same.     Pin Description: - : Negative power supply +: Positive power supply, DC 3-24V   K1: 1 short to Negative start transmitting data, Similar the A button on the remote control. K2: 2 short to Negative start transmitting data, Similar the B button on the remote control. K3: 3 short to Negative start transmitting data, Similar...

Model: KT02-117S-4  Product Type: KT02-117S-4Product Type:Learning Code (1527) Remote Control Key FobRF Frequency: 433 MHzChannel Supported: Four ChannelButtons: Four ButtonsModulation System: ASKBattery: CR2032 Operating Current:12mATransmitting Power: 10mWTransmission Distance: 50m(Please notice that the 100m distance is the ideal distance without any block and signal interfere. It would rise and fall about 10%-50% with the block and signal interference).Color: BrownMain Item Size: 6.5 * 3.2 * 1.2cm / 2.55 * 1.25 * 0.47inMain Item Weight: 28g/o.9oz Each remote controller has an independent address code, so the remote controllers are separate individuals and do not cause mutual interference.   Applications Anti-theft alarm system for...

New product preview！ New products are coming online soon ！！KR2201G a Small receiver ! Remote Control Switch User Manual 220V Remote Control Switch (Receiver) Qiachip KR2201-4 Wireless Remote Switch user manual Qiachip KR2201D Wireless Remote Switch user manual Qiachip KR2201G Wireless Remote Switch user manual Qiachip KR2201W Wireless Remote Switch user manual Qiachip KR2201WB Smart WIFI Remote Control user manual   Qiachip KR2202 Wireless Remote Switch user manual   12V Remote Control Switch (Receiver) Qiachip KR1201A 12V 1CH Wireless Remote Switch user manual Qiachip KR1202 12V 2CH Wireless Remote Switch user manual Qiachip KR1204 12V 4CH Wireless Remote Switch user manual   24V Remote Control Switch (Receiver)...

Applicable Model：FlCW 1. Open the page of the fan light controller APP and turn on the fan light. 2. Select "Settings" settings. 3. Turn off the "Voice" setting. 4. Restart the fan light, the setting is successful.  Instructions for use: Click here Get a New 

Safety Warning This device is for indoor use only. This device should not be exposed to dripping or splashing water or any danger Sources. This device should only be installed by adults. Do not install near any heat sources. Do not use this device with dimmers. Do not use this device in totally enclosed luminaires. Use this device in open luminaires only. If this device is much heavier than the one to be replaced , the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention. RISK OF ELECTRIC SHOCK：USE...