User Menus

 Model: RX136E-4  Click to buy Electrical parameters: Working voltage:  3-5V Receiving frequency:  433.920MHZ  ±  30K Receiving sensitivity:  -111dBM Maximum distance:  > 40m Port output impedance:  50ohm Modulation method  : ASK / OOK Learning method: key combination Decoding format:  EV1527  and  PT2262 Standby current:  ≈   6 mA (  not power saving mode  ) Code sending current: (working current of the module itself, non-external load current) generally  7.5mA Load power:  0.3W Support encoding format:  1527  learning code Working modes: inching, self-locking,  interlocking and four mixed modes, clear codes (for details, please refer to the function introduction) Storage capacity: up to   12  code...

 Model：KR1201MINI2-4 Click to Buy Electrical parameters: Working voltage: 3-5V Standby current: ≈6mA (without power saving mode) Working current: (working current of the module itself, non-external load current) generally 5mA Load power: 30W, 1A/30VDC 0.3A/125VAC Receiving frequency: 920MHZ Receiving sensitivity: -100dBM Port output impedance: 50ohm Modulation type: ASK/OOK Support encoding format: 1527 learning code Learning method: key learning Working mode: Jog, self-locking, interlocking, clearing code, setting switch state (open or closed when switching) Storage quantity: Maximum storage of 12 groups of instructions. Working temperature: -20~80 degrees Dimensions: 3 * 13 * 6.8 Weight: 4g Application range: motor drive, signal switch, micro...

User Manual Receiver Functions(Right Diagram) AC IN L (Left Black) Input Live wire AC IN N (Left White) Input Neutral wire FAN (Right Black) Output Fan Live wire (Fan) LIGHT (Right Blue) Output Light Live wire (Light) COM (Right White) Output Neutral wire (Light & Fan Common connection)   Remote Control Functions (Right Diagram) ①　LED Light Indicator LED Light ②　LOW/MED/HI Minimum, Medium, Maximum Fan speed ③　STOP Stops Fan ④　2H/4H/8H/1H Fan & Light Timer ⑤　Light ON/OFF Switch Light from on & off   Installation Wiring diagram   Specifications Applications Light/Fan Operating Voltage 110V/220V Depending on model Max Load Power <300W Ceiling...

Operating Introduction Clearing the code :Push the learning button on the receivers for 8 times , the codes will be cleaned .After clearning the code, all the remote control cannot work any more.Learning the code :(momentary)Push the learning key on the receiver once time , it comes into momentary setting mode .Wait for a moment , the LED will be off , it comes into learning state .Push the remote button , LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again , learning successfully .Learning the code :...

1527 Learning button Wireless Remote Control with No Cloning Specifications Of The Transmitter: Model Number: KT16-4.Materials: ABS.Channel: 4 Channel.Encoding Type: Learning Code (1527).F Frequency: 433 MHz.Modulation System: ASK.Match Code Way: Fixed Code.Working Voltage: DC 12V.Working Current: <25mA.Working RF Frequency: 433MHZ.Transmitting Power: +13dbm.Remote Control Distance: 50m(Please notice that the 100m distance is the ideal distance without any block and signal interfere. It would rise and fall about 10%-50% with the block and signal interference).   BUY NOW